manualshive.com logo in svg

Kia Stinger 2019, Owner'S Manual, Page: 66 / 671

Share
Download
Kia Stinger 2019 Owner'S Manual Download Page 66

3 47

Safety features of your vehicle

Securing a Child Restraint
System seat with “Top-tether
Anchorage” system (if equipped)

Top-tether anchorages for Child
Restraint Systems are located on the
back of the rear seatbacks.

WARNING 

Take the following precautions
when using the ISOFIX system:
• Read and follow all installation

instructions provided with
your Child Restraint System.

• To prevent the child from

reaching and taking hold of
unretracted seat belts, buckle
all unused rear seat belts and
retract the seat belt webbing
behind the child. Children can
be strangled if a shoulder belt
becomes wrapped around
their neck and the seat belt
tightens.

• NEVER attach more than one

Child Restraint System to a
single anchorage. This could
cause the anchor or attach-
ment to come loose or break.

(Continued)

(Continued)
• Always have the ISOFIX sys-

tem inspected by your dealer
after an accident. An accident
can damage the ISOFIX sys-
tem and may not properly
secure the Child Restraint
System.

OCK037027

OCK037027R

■

Type B

■

Type A

Summary of Contents for Stinger 2019
































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments