manualshive.com logo in svg

Kia Stinger 2019, Owner'S Manual, Page: 658 / 671

Share
Download
Kia Stinger 2019 Owner'S Manual Download Page 658

Specifications & Consumer information

14

8

The tyres supplied on your new vehi-
cle are chosen to provide the best
performance for normal driving.
The tyre label located on the driver's
side centre pillar gives the tyre pres-
sures recommended for your vehicle.

The engine number is stamped on the
engine block as shown in the drawing.

A compressor label informs you the
type of compressor your vehicle is
equipped with such as model, suppli-
er part number, production number,
refrigerant (1) and refrigerant oil (2).

TYRE SPECIFICATION AND
PRESSURE LABEL

ENGINE NUMBER

OCK087002

OCK087003

OCK088004

■

Petrol engine (Lambda II PE 3.3L T-GDI)

■

Petrol engine (Theta II 2.0L T-GDI)

■

Diesel engine (R2.2)

OCK087008R

AIR CONDITIONER 
COMPRESSOR LABEL

OCK087006L

Summary of Contents for Stinger 2019
































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments