manualshive.com logo in svg

Kia Stinger 2019, Owner'S Manual, Page: 657 / 671

Share
Download
Kia Stinger 2019 Owner'S Manual Download Page 657

8 13

Specifications & Consumer information

VEHICLE IDENTIFICATION NUMBER (VIN)

The vehicle identification number
(VIN) is the number used in register-
ing your vehicle and in all legal mat-
ters pertaining to its ownership, etc.
The number is punched on the floor
under the driver or passenger seat.
To check the number, open the
cover.

The VIN is also on a plate attached
to the top of the dashboard. The
number on the plate can easily be
seen through the windscreen from
outside.

The vehicle certification label
attached on the driver’s (or front pas-
senger’s) side centre pillar gives the
vehicle identification number (VIN).

OCK087001

■

Frame number

VEHICLE CERTIFICATION
LABEL

OCK087005R

OUM084005

OUM084005/H

■

VIN label (if equipped)

•

Type A

•

Type B

Summary of Contents for Stinger 2019
































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments