manualshive.com logo in svg

Kia Stinger 2019, Owner'S Manual, Page: 616 / 671

Share
Download
Kia Stinger 2019 Owner'S Manual Download Page 616

7 117

Maintenance

Headlamp aiming (for Europe)

Headlamp aiming

1. Inflate the tyres to the specified

pressure and remove any loads
from the vehicle except the driver,
spare tyre, and tools.

2. The vehicle should be placed on a

flat floor.

3. Draw vertical lines (Vertical lines

passing through respective head
lamp centers) and a horizontal line
(Horizontal line passing through
centre of head lamps) on the
screen.

4. With the head lamp and battery in

normal condition, aim the head
lamps so the brightest portion falls
on the horizontal and vertical
lines.

5. To aim the low and high beams left

or right, turn the driver (1) clock-
wise or counterclockwise. To aim
the low and high beams up or
down, turn the driver (2) clockwise
or counterclockwise.

OCK077083L

Summary of Contents for Stinger 2019
































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments