manualshive.com logo in svg

Kia Stinger 2019, Owner'S Manual, Page: 615 / 671

Share
Download
Kia Stinger 2019 Owner'S Manual Download Page 615

116

7

Maintenance

Room lamp (LED type) bulb
replacement

If the room lamp (LED) (1), does not
operate, have your vehicle checked
by a professional workshop.
Kia recommends to visit an autho-
rised Kia dealer/service partner.
The LED lamps cannot be replaced
as a single unit because it is an inte-
grated unit. The LED lamps has to be
replaced with the unit.
A skilled technician should check or
repair the room lamp (LED), for it
may damage related parts of the
vehicle.

Glove box lamp (LED type)
bulb replacement

If the glove box lamp (LED) (1), does
not operate, have your vehicle
checked by a professional workshop.
Kia recommends to visit an autho-
rised Kia dealer/service partner.
The LED lamps cannot be replaced
as a single unit because it is an inte-
grated unit. The LED lamps has to be
replaced with the unit.
A skilled technician should check or
repair the glove box lamp (LED), for
it may damage related parts of the
vehicle.

Luggage room lamp (LED
type) bulb replacement

If the luggage room lamp (LED) (1),
does not operate, have your vehicle
checked by a professional workshop.
Kia recommends to visit an autho-
rised Kia dealer/service partner.
The LED lamps cannot be replaced
as a single unit because it is an inte-
grated unit. The LED lamps has to be
replaced with the unit.
A skilled technician should check or
repair the luggage room lamp (LED),
for it may damage related parts of
the vehicle.

OCK077065

OCK077066R

OCK077067

Summary of Contents for Stinger 2019
































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments