manualshive.com logo in svg

Kia Stinger 2019, Owner'S Manual, Page: 609 / 671

Share
Download
Kia Stinger 2019 Owner'S Manual Download Page 609

110

7

Maintenance

Stop and tail lamp (LED type)
bulb replacement

If the stop and tail lamp (LED) (1,2),
does not operate, have your vehicle
checked by a professional workshop.
Kia recommends to visit an autho-
rised Kia dealer/service partner.
The LED lamps cannot be replaced
as a single unit because it is an inte-
grated unit. The LED lamps has to be
replaced with the unit.
A skilled technician should check or
repair the stop and tail lamp (LED),
for it may damage related parts of
the vehicle.

Rear fog lamp (LED type) bulb
replacement

If the rear fog lamp (LED) (1), does
not operate, have your vehicle
checked by a professional workshop.
Kia recommends to visit an autho-
rised Kia dealer/service partner.
The LED lamps cannot be replaced
as a single unit because it is an inte-
grated unit. The LED lamps has to be
replaced with the unit.
A skilled technician should check or
repair the rear fog lamp (LED), for it
may damage related parts of the
vehicle.

Rear turn signal lamp (LED
type) bulb replacement

If the rear turn signal lamp (LED) (1),
does not operate, have your vehicle
checked by a professional workshop.
Kia recommends to visit an autho-
rised Kia dealer/service partner.
The LED lamps cannot be replaced
as a single unit because it is an inte-
grated unit. The LED lamps has to be
replaced with the unit.
A skilled technician should check or
repair the rear turn signal lamp
(LED), for it may damage related
parts of the vehicle.

OCK077053

OCK077086L

OCK077087L

Summary of Contents for Stinger 2019
































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments