manualshive.com logo in svg

Kia Stinger 2019, Owner'S Manual, Page: 577 / 671

Share
Download
Kia Stinger 2019 Owner'S Manual Download Page 577

78

7

Maintenance

✽

✽

NOTICE

• When replacing fuse, turn the

ignition “OFF” and turn off
switches of all electrical devices
then remove battery (-) terminal.  

• The actual fuse/relay panel label

may differ from equipped items.

WARNING

- Fuse

replacement

• Never replace a fuse with any-

thing but another fuse of the
same rating.

• A higher capacity fuse could

cause damage and possibly a
fire.

• Never install a wire or aluminum

foil instead of the proper fuse
even as a temporary repair. It
may cause extensive wiring
damage and a possible fire.

• Do not arbitrarily modify or add-

on electric wiring of the vehicle.

CAUTION

Do not use a screwdriver or any
other metal object to remove
fuses because it may cause a
short circuit and damage the
system.

CAUTION

• When replacing a blown fuse

or relay with a new one, make
sure the new fuse or relay fits
tightly into the clips. The
incomplete fastening fuse or
relay may cause the vehicle
wiring and electric systems
damage and a possible fire.

• Do not remove fuses, relays

and terminals fastened with
bolts or nuts. The fuses, relays
and terminals may be fas-
tened incompletely, and it may
cause a possible fire. If fuses,
relays and terminals fastened
with bolts or nuts are blown,
consult a professional work-
shop. Kia recommends to
consult an authorised Kia
dealer/service partner.

(Continued)

Summary of Contents for Stinger 2019
































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments