Kia Stinger 2019, Owner'S Manual, Page: 558 / 671

7 59
Maintenance
Front windscreen wiper blade
For your convenience, move the
windscreen wiper blades to the serv-
ice position as follows;
After turning off the engine, move the
wiper switch to the single wiping
(MIST) position within 20 seconds
and hold the switch more than 2 sec-
onds until the wiper blade is in the
fully up position.
1. Raise the wiper arm.
2. Lift up the wiper blade clip. Then
pull down the blade assembly and
remove it.
3. Install the new blade assembly.
4. Return the wiper arm on the wind-
screen.
5. Turn ignition to the ON position
and wiper arms will return to the
normal operating position.
OCK077030R
CAUTION
Do not allow the wiper arm to
fall against the windscreen,
since it may chip or crack the
windscreen.
OYB046462R
OYB046463R