manualshive.com logo in svg

Kia Stinger 2019, Owner'S Manual, Page: 555 / 671

Share
Download
Kia Stinger 2019 Owner'S Manual Download Page 555

56

7

Maintenance

CLIMATE CONTROL AIR FILTER

Filter inspection

The climate control air filter should
be replaced according to the mainte-
nance schedule. If the vehicle is
operated in severely air-polluted
cities or on dusty rough roads for a
long period, it should be inspected
more frequently and replaced earlier.
When you replace the climate control
air filter, replace it performing the fol-
lowing procedure, and be careful to
avoid damaging other components.

1. Open the glove box and remove

the stoppers on both sides.

2. With the glove box open, pull the

support strap (1).

OCK077026R

OCK077027R

Summary of Contents for Stinger 2019
































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments