manualshive.com logo in svg

Kia Stinger 2019, Owner'S Manual, Page: 554 / 671

Share
Download
Kia Stinger 2019 Owner'S Manual Download Page 554

7 55

Maintenance

AIR CLEANER

Filter replacement

It must be replaced when necessary,
and should not be washed.
Have the air cleaner filter inspected or
replaced by a professional workshop.
Kia recommends to visit an autho-
rised Kia dealer/service partner.

Replace the filter according to the
Maintenance Schedule.

If the vehicle is operated in extreme-
ly dusty or sandy areas, replace the
element more often than the usual
recommended intervals. (Refer to
“Maintenance under severe usage
conditions” in this chapter.)

OCK077022

OCK077023

■

THETA II 2.0L T-GDI Engine (Petrol)

■

Lambda II PE 3.3L T-GDI
Engine (Petrol) (Driver side)

OCK077024

OCK077025

■

Lambda II PE 3.3L T-GDI Engine (Petrol)
(Passenger side)

■

R 2.2L Engine (Diesel)

CAUTION

• Do not drive with the air clean-

er removed; this will result in
excessive engine wear.

• When removing the air cleaner

filter, be careful that dust or
dirt does not enter the air
intake, or damage may result.

• Use parts for replacement

from a professional workshop.
Kia recommends to visit an
authorised Kia dealer/service
partner.

Summary of Contents for Stinger 2019
































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments