manualshive.com logo in svg

Kia Stinger 2019, Owner'S Manual, Page: 549 / 671

Share
Download
Kia Stinger 2019 Owner'S Manual Download Page 549

50

7

Maintenance

Changing the coolant

Have the coolant replaced by a pro-
fessional workshop. Kia recommends
to visit an authorised Kia dealer/serv-
ice partner.

WARNING 

Radiator cap

Do not remove the radiator cap
when the engine and radiator
are hot. Scalding hot coolant
and steam may blow out under
pressure causing serious
injury.

CAUTION

Put a thick cloth around the radia-
tor cap before refilling the coolant
in order to prevent the coolant
from overflowing into engine
parts such as the alternator.

WARNING

- Coolant

• Do not use radiator coolant or

antifreeze in the washer fluid
reservoir.

• Radiator coolant can severely

obscure visibility when
sprayed on the windscreen
and may cause loss of vehicle
control or damage the paint
and body trim.

OCK077017

Summary of Contents for Stinger 2019
































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments