manualshive.com logo in svg

Kia Stinger 2019, Owner'S Manual, Page: 547 / 671

Share
Download
Kia Stinger 2019 Owner'S Manual Download Page 547

48

7

Maintenance

Check the condition and connections
of all cooling system hoses and
heater hoses. Replace any swollen
or deteriorated hoses.
The coolant level should be filled
between F (Full) and L (Low) marks
on the coolant level gauge when the
engine is cool.
If the coolant level is low, add enough
specified coolant to provide protection
against freezing and corrosion. Bring
the level to F (Full), but do not overfill. If
frequent additions are required, have
the system inspected by a professional
workshop. Kia recommends to visit an
authorised Kia dealer/service partner.

✽

✽

NOTICE

Make sure the coolant cap is proper-
ly closed after refill of coolant. 
Otherwise the engine could be over-
heated whilst driving.

1. Check if the radiator cap label is

straight In front.

WARNING

The electric motor
(cooling fan) is con-
trolled by engine
coolant temperature,
refrigerant pressure

and vehicle speed. It may some-
times operate even when the
engine is not running. Use
extreme caution when working
near the blades of the cooling
fan so that you are not injured
by a rotating fan blades. As the
engine coolant temperature
decreases, the electric motor
will automatically shut off. This
is a normal condition.
The electric motor (cooling fan)
may operate until you discon-
nect the negative battery cable.

OCK077016 

OQL075072

■

Engine room front view

Summary of Contents for Stinger 2019
































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments