manualshive.com logo in svg

Kia Stinger 2019, Owner'S Manual, Page: 541 / 671

Share
Download
Kia Stinger 2019 Owner'S Manual Download Page 541

42

7

Maintenance

Steering gear box, linkage &
boots/lower arm ball joint

With the vehicle stopped and engine
off, check for excessive free-play in
the steering wheel.
Check the linkage for bends or dam-
age. Check the dust boots and ball
joints for deterioration, cracks, or dam-
age. Replace any damaged parts.

Drive shafts and boots

Check the drive shafts, boots and
clamps for cracks, deterioration, or
damage. Replace any damaged parts
and, if necessary, repack the grease.

Air conditioning refrigerant

Check the air conditioning lines and
connections for leakage and damage.

Summary of Contents for Stinger 2019
































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments