manualshive.com logo in svg

Kia Stinger 2019, Owner'S Manual, Page: 54 / 671

Share
Download
Kia Stinger 2019 Owner'S Manual Download Page 54

3 35

Safety features of your vehicle

Seat belt precautions

Infant or small child

You should be aware of the specific
requirements in your country. Child
and/or infant seats must be properly
placed and installed in the rear seat.
For more information about the use
of these restraints, refer to “Child
restraint system” in this section.

CAUTION

Body work on the front area of
the vehicle may damage the pre-
tensioner seat belt system.
Therefore, have the system
serviced by a professional
workshop. Kia recommends to
visit an authorised Kia
dealer/service partner.

WARNING

All occupants of the vehicle
must wear their seat belts at all
times. Seat belts and child
restraints reduce the risk of
serious or fatal injuries for all
occupants in the event of a col-
lision or sudden stop. Without a
seat belt, occupants could be
shifted too close to a deploying
air bag, strike the interior struc-
ture or be thrown from the vehi-
cle.

Properly worn seat belts

greatly reduce these hazards.
Always follow the precautions
about seat belts, air bags and
occupant seating contained in
this manual.

Summary of Contents for Stinger 2019
































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments