manualshive.com logo in svg

Kia Stinger 2019, Owner'S Manual, Page: 491 / 671

Share
Download
Kia Stinger 2019 Owner'S Manual Download Page 491

6 35

What to do in an emergency

11. Switch off the compressor.
12. Detach the hose from the sealant

bottle connector and from the
tyre valve.

Return the Tyre Mobility Kit to its
storage location in the vehicle.

Distributing the sealant

13. Immediately drive approximately

7~10 km (4~6 miles or, about 10
min) to evenly distribute the
sealant in the tyre.

CAUTION

Do not exceed a speed of 80
km/h (50 mph). If possible, do
not fall below a speed of 20
km/h (12 mph).
Whilst driving, if you experience
any unusual vibration, ride dis-
turbance or noise, reduce your
speed and drive with caution
until you can safely pull off of
the side of the road. Call for
road side service or towing.
When you use the Tyre Mobility
Kit, the wheel may be stained by
sealant. Therefore, remove the
tyre pressure sensors and have
the vehicle inspected at a pro-
fessional workshop. Kia recom-
mends to visit an authorised Kia
dealer/service partner.

WARNING

Carbon monoxide poisoning
and suffocation is possible if the
engine is left running in a poorly
ventilated or unventilated loca-
tion (such as inside a building).

Summary of Contents for Stinger 2019
































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments