Kia Stinger 2019 Owner'S Manual Download Page 489

Page: 489 / 671

6 33

What to do in an emergency

3. Shake the sealant bottle.

4. Connect the filling hose (3) onto

the connector of the sealant bottle.

5. Ensure that button (7) on the com-

pressor is not pressed.

6. Unscrew the valve cap from the

valve of the defective wheel and
screw filling hose (3) of the sealant
bottle onto the valve.

OJF067055

ODEP067048

OCK067010

Summary of Contents for Stinger 2019
































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for Stinger 2019

Reviews:

Kia Stinger 2019, Owner'S Manual, Page: 489 / 671

Search results

Summary of Contents for Stinger 2019

Reviews: