manualshive.com logo in svg

Kia Stinger 2019, Owner'S Manual, Page: 487 / 671

Share
Download
Kia Stinger 2019 Owner'S Manual Download Page 487

6 31

What to do in an emergency

1. Speed restriction label
2. Sealant bottle and label with

speed restriction

3. Filling hose from sealant bottle to

wheel

4. Connectors and cable for the

power outlet direct connection

5. Holder for the sealant bottle
6. Compressor
7. On/off switch

WARNING

• If the sealant gets on your

skin, wash it with a large
amount of water and if it irri-
tates continuously, visit a
doctor for examination.

• If the sealant gets into your

eyes, raise your eyelid and
wash for at least 15 minutes. If
it irritates continuously, visit a
doctor for examination.

• If you have drank the sealant,

wash the mouth and drink a
large amount of water.
However, do not give anything
to an unconscious person and
see the doctor immediately.
Exposure to the sealant for a
long time may cause damage
to the bodily tissues.

Components of the Tyre Mobility Kit (TMK)

ODE067044

Summary of Contents for Stinger 2019
































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments