manualshive.com logo in svg

Kia Stinger 2019, Owner'S Manual, Page: 484 / 671

Share
Download
Kia Stinger 2019 Owner'S Manual Download Page 484

28

6

What to do in an emergency

IF YOU HAVE A FLAT TYRE (WITH TYRE MOBILITY KIT, IF EQUIPPED)

Please read the instructions before
using the Tyre Mobility Kit.
(1) Compressor
(2) Sealant bottle

The Tyre Mobility Kit is a temporary
fix to the tyre and have the tyre
inspected by a professional work-
shop as soon as possible. Kia rec-
ommends to visit an authorised Kia
dealer/service partner.

OCK067007

CAUTION

- One sealant

for one tyre

When two or more tyres are flat,
do not use the tyre mobility kit
because the one supplied canis-
ter of sealant in the Tyre Mobility
Kit is to only enough sealant for
one flat tyre.

WARNING

- Tyre  wall

Do not use the Tyre Mobility Kit
to repair punctures in the tyre
walls. This can result in an acci-
dent due to tyre failure.

WARNING

- Temporary  fix

Have your tyre repaired as soon
as possible. The tyre may lose
air pressure at any time after
inflating with the Tyre Mobility
Kit.

CAUTION

• When replacing or repairing

the tyre after using tyre
sealant,

make certain to

remove the sealant attached
to the inner part of the tyre
and wheel. If the sealant is not
removed, noise and vibration
may occur.

• We recommend use original

Kia manufactured sealant.
Using aftermarket sealant may
damage the tyre pressure
detection sensor.

(Continued)

Summary of Contents for Stinger 2019
































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments