manualshive.com logo in svg

Kia Stinger 2019, Owner'S Manual, Page: 458 / 671

Share
Download
Kia Stinger 2019 Owner'S Manual Download Page 458

2

6

ROAD WARNING

Hazard warning flasher

The hazard warning flasher serves
as a warning to other drivers to exer-
cise extreme caution when
approaching, overtaking, or passing
your vehicle.

It should be used whenever emer-
gency repairs are being made or
when the vehicle is stopped near the
edge of a roadway.
Depress the flasher switch with the
Engine start/stop button is in any
position. The flasher switch is located
in the centre console switch panel.
All turn signal lights will flash simul-
taneously.

• The hazard warning flasher oper-

ates whether your vehicle is run-
ning or not.

• The turn signals do not work when

the hazard flasher is on.

• Care must be taken when using

the hazard warning flasher whilst
the vehicle is being towed.

What to do in an emergency

OCK067021R

Summary of Contents for Stinger 2019
































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments