manualshive.com logo in svg

Kia Stinger 2019, Owner'S Manual, Page: 44 / 671

Share
Download
Kia Stinger 2019 Owner'S Manual Download Page 44

3 25

Safety features of your vehicle

Driver's seat belt warning

As a reminder to the driver, the seat
belt warning light will illuminate for
approximately 6 seconds each time
you turn the engine start/stop button
is in ON regardless of belt fastening
and warning chime will sound for
approximately 6 seconds  each time
you turn the engine start/stop button
is in ON when the belt is unfastened.

If a driver continue not to fasten the
seat belt and drive below 20km/h, the
warning light will stay illuminated.
If a driver continue not to fasten the
seat belt whilst driving over 20km/h,
the seat belt warning chime will
sound for approximately 100 seconds
and the corresponding warning light
will blink.
If a driver unfasten the seat belt whilst
driving below 20km/h, the warning
light will stay illuminated.
If a driver unfasten the seat belt whilst
driving over 20km/h, the seat belt
warning chime will sound for approxi-
mately 100 seconds and the corre-
sponding warning light will blink.

Front passenger's seat belt warning 
(if equipped)

As a reminder to the front passenger,
the front passenger’s seat belt warn-
ing lights will illuminate for approxi-
mately 6 seconds each time you turn
the Engine start/stop button in ON
regardless of belt fastening.

If the front passenger continue not to
fasten the seat belt and drive below
20km/h, the warning light will stay
illuminated.

1GQA2083

OCK037022R

Summary of Contents for Stinger 2019
































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments