manualshive.com logo in svg

Kia Stinger 2019, Owner'S Manual, Page: 430 / 671

Share
Download
Kia Stinger 2019 Owner'S Manual Download Page 430

5 147

Driving your vehicle

Resetting the system 

• The last break time is set to 00:00

and the driver's attention level is
set to 5 (very attentive) when the
driver resets the Driver Attention
Warning system.

• The driver attention warning sys-

tem resets in the following situa-
tions.

- The engine is turned OFF.
- The driver unfastens the seat belt

and then opens the driver’s door.

- Stop lasting more than 10 min-

utes.

• The driver attention warning sys-

tem operates again, when the driv-
er restarts driving.

System disabled

The Driver Attention Warning system
enters the ready status and displays
the 'Disabled' screen in the following
situations.
- The camera sensor keeps failing to

detect the lanes.

- Driving speed remains under 60

km/h or over 180 km/h.

OCK057140L

Summary of Contents for Stinger 2019
































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments