Kia Stinger 2019 Owner'S Manual Download Page 427

Page: 427 / 671

Driving your vehicle

144

- When the sensors are blocked by

other vehicles, walls or parking-lot
pillars.

- When the detected vehicle also

moves back, as your vehicle drives
back.

- If there are small things like

Shopping cart, baby carriage and
pedestrians.

- If there is low height vehicle like

sport vehicle.

- When other vehicles are close to

your vehicle.

- When the vehicle in the next lane

moves two lanes away from you
OR when the vehicle two lanes
away moves to the next lane from
you.

- When driving through a narrow

road with many plants.

- When driving on wet surface.

- The vehicle is driven near areas

containing metal substances such
as a construction zone, railroad,
etc.

- When the surrounding vehicle or

structure is driving in a wide area
(desert, field, suburb etc.)

Summary of Contents for Stinger 2019
































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for Stinger 2019

Reviews:

Kia Stinger 2019, Owner'S Manual, Page: 427 / 671

Search results

Summary of Contents for Stinger 2019

Reviews: