manualshive.com logo in svg

Kia Stinger 2019, Owner'S Manual, Page: 417 / 671

Share
Download
Kia Stinger 2019 Owner'S Manual Download Page 417

Driving your vehicle

134

5

LKA malfunction

• If there is a problem with the sys-

tem a message will appear. If the
problem continues the LKA fail
indicator will illuminate.

LKA fail indicator

The LKA fail indicator (yellow) will
illuminate with an audible warning if
the LKA is not working properly. In
this case, have the system checked
by a professional workshop. Kia rec-
ommends to visit an authorised Kia
dealer/service partner.

WARNING  

The Lane Keeping Assist (LKA)
system is a system to help pre-
vent the driver from leaving the
lane. However, the driver should
not solely rely on the system
but always take the necessary
actions for safe driving prac-
tices.

OCK057126L

Summary of Contents for Stinger 2019
































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments