manualshive.com logo in svg

Kia Stinger 2019, Owner'S Manual, Page: 406 / 671

Share
Download
Kia Stinger 2019 Owner'S Manual Download Page 406

5 123

Driving your vehicle

SMART mode selects the
proper driving mode
among ECO, COMFORT
and SPORT by judging the

driver's driving habits (i.e. mild or
dynamic) from the brake pedal
depression or the steering wheel
operation.

• Press the DRIVE MODE button to

activate SMART mode. When
SMART mode is activated, the
indicator illuminates on the instru-
ment cluster.

• The indicator illuminates in blue,

when the driver's driving is catego-
rized to be mild. It illuminates in
white, when the driver's driving is
categorized to be normal. It illumi-
nates in red, when the driver's driv-
ing is categorized to be dynamic
during abrupt braking or sharp
curving.

• The vehicle starts in COMFORT

mode, when the engine was turned
OFF in SMART mode.

• SMART mode automatically con-

trols the vehicle driving, such as
gear shifting patterns, engine
torque, riding quality (if equipped
with the electronic suspension sys-
tem), and power distribution (if
equipped with the All-Wheel Drive
(AWD) system), in accordance with
the driver's driving habits.

✽

✽

NOTICE

• When you mildly drive the vehicle

in SMART mode, the driving
mode changes to ECO mode to
improve fuel efficiency. However,
the actual fuel efficiency may dif-
fer in accordance with your driv-
ing situations (i.e. upward/down-
ward slope, vehicle
deceleration/acceleration). 

• When you dynamically drive the

vehicle in SMART

mode by

abruptly decelerating or sharply
curving, the driving mode changes
to  SPORT mode. However, it may
adversely affect fuel economy.

SMART

Summary of Contents for Stinger 2019
































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments