manualshive.com logo in svg

Kia Stinger 2019, Owner'S Manual, Page: 396 / 671

Share
Download
Kia Stinger 2019 Owner'S Manual Download Page 396

5 113

Driving your vehicle

• Your vehicle speed can be reduced

due to a vehicle in the adjacent
lane. Adjust your vehicle speed by
depressing the brake pedal
according to the road condition
ahead and driving condition. Apply
the accelerator pedal and select
the appropriate set speed. Check
to be sure that the road conditions
permit safe operation of the smart
cruise control.

On inclines

• During uphill or downhill driving,

the smart cruise control system
may not detect a moving vehicle in
your lane, and cause your vehicle
to accelerate to the set speed.
Also, the vehicle speed will rapidly
down when the vehicle ahead is
recognized suddenly.

• Select the appropriate set speed

on inclines and adjust your vehicle
speed by depressing the accelera-
tor or brake pedal according to the
road condition ahead and driving
condition.

Lane changing

• A vehicle which moves into your

lane from an adjacent lane cannot
be recognized by the sensor until it
is in the sensor's detection range.

• The sensor may not detect imme-

diately when a vehicle cuts in sud-
denly. Always pay attention to the
traffic, road and driving conditions.

• If a vehicle which moves into your

lane is slower than your vehicle,
your speed may decrease to main-
tain the distance to the vehicle
ahead.

OCK057024

OJF055026

OJF055028

Summary of Contents for Stinger 2019
































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments