manualshive.com logo in svg

Kia Stinger 2019, Owner'S Manual, Page: 390 / 671

Share
Download
Kia Stinger 2019 Owner'S Manual Download Page 390

5 107

Driving your vehicle

• The vehicle will maintain the set

speed, when the lane ahead is
clear.

• The vehicle will slow down or

speed up to maintain the selected
distance, when there is a vehicle
ahead of you in the lane. (A vehicle
will appear in front of your vehicle
in the LCD display only when there
is an actual vehicle in front of you) 

• If the vehicle ahead speeds up,

your vehicle will travel at a steady
cruising speed after accelerating to
the selected speed.

OCK057103

OCK057105

OCK057104

OCK057106

When there is a vehicle ahead of you in your lane :

Summary of Contents for Stinger 2019
































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments