manualshive.com logo in svg

Kia Stinger 2019, Owner'S Manual, Page: 388 / 671

Share
Download
Kia Stinger 2019 Owner'S Manual Download Page 388

5 105

Driving your vehicle

To turn cruise control off:

Press the CRUISE button. (the
CRUISE indicator in the instrument
cluster will go off).
When the Smart Cruise Control
System is not needed, press the
[CRUISE] switch and deactivate the
system.

• Press the 

button (The

CRUISE indicator light will go

off.). (if equipped with Speed Limit
Control)
- With the Smart Cruise Control

on, pressing the button once will
turn Off the Smart Cruise Control
and turn on the Speed Limit
Control.

- With the Smart Cruise Control off

and Speed Limit Control on,
pressing the button will turn off
both system.

Vehicle to vehicle distance
setting

To set vehicle to vehicle distance:

This function allows you to program
the vehicle to maintain relative dis-
tance to the vehicle ahead without
depressing the accelerator pedal or
brake pedal.
The vehicle to vehicle distance will
automatically activate when the
smart cruise control system is on.
Select the appropriate distance
according to road conditions and
vehicle speed.

OCK057032L

OCK057036L

Summary of Contents for Stinger 2019
































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments