manualshive.com logo in svg

Kia Stinger 2019, Owner'S Manual, Page: 386 / 671

Share
Download
Kia Stinger 2019 Owner'S Manual Download Page 386

5 103

Driving your vehicle

Cancelled automatically

• The driver's door is opened.
• The shift lever is shifted to N

(Neutral), R (Reverse) or P (Paking).

• The EPB (electronic parking brake)

is applied.

• The vehicle speed is over 210

km/h (130 mph)

• The ESC, ABS or TCS is operating.
• The ESC is turned off.
• The sensor or the cover is dirty or

blocked with foreign matter.

• When the vehicle is stopped for

over 5 minutes.

• The driver starts driving by pushing

the lever up (RES +) or down 
(SET -) or depressing the acceler-
ator pedal approximately 3 sec-
onds after the vehicle is stopped by
the smart cruise control System
with no other vehicle ahead or a
vehicle stopped far away in front.

• The accelerator pedal is continu-

ously depressed for long time.

• The engine speed is in dangerous

range.

• The SCC system has malfunc-

tioned.

• When activating the ISG mode.
• When the braking control is operat-

ed for Forward Collision-Avoidance
Assist(FCA)

• The vehicle is stopped for more

than 5 minutes.

• The driver starts driving by pushing

the toggle switch up (RES+)/down
(SET-) or depressing the accelera-
tor pedal, after the vehicle is
stopped by the Smart Cruise
Control system with no other vehi-
cle ahead.

• The vehicle stops and goes repeat-

edly for a long period of time.

• When the parking brake is locked.
• Engine has some problems.

Each of these actions will cancel the
smart cruise control operation. (the
set speed and vehicle to vehicle dis-
tance on the LCD display will go off.)
In a condition the smart cruise con-
trol is cancelled automatically, the
smart cruise control will not resume
even though the RES+ or SET-lever
is moved.

CAUTION

If the smart cruise control is
cancelled by other than the rea-
sons mentioned, have the sys-
tem checked by a professional
workshop. Kia recommends to
visit an authorised Kia
dealer/service partner.

Summary of Contents for Stinger 2019
































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments