manualshive.com logo in svg

Kia Stinger 2019, Owner'S Manual, Page: 380 / 671

Share
Download
Kia Stinger 2019 Owner'S Manual Download Page 380

5 97

Driving your vehicle

• Do not touch the camera lens or

remove the screw located on the
camera unit.

• The system does not work in all sit-

uations but is designed merely as a
supplementary aid.

• The system assists the driver and

does not replace the human eye.

• The driver always bears ultimate

responsibility for ensuring that the
vehicle is driven safely and that
applicable road traffic rules and
regulations are followed.

Summary of Contents for Stinger 2019
































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments