manualshive.com logo in svg

Kia Stinger 2019, Owner'S Manual, Page: 374 / 671

Share
Download
Kia Stinger 2019 Owner'S Manual Download Page 374

5 91

Driving your vehicle

✽

✽

NOTICE

• Depressing the accelerator pedal

less than approximately 50%, the
vehicle will not speed over the pre-
set speed limit but maintain the
vehicle speed within the speed
limit.

• A clicking noise heard from the

kick down mechanism by depress-
ing the accelerator pedal fully is a
normal condition.

To turn off the Manual Speed
Limit Assist, do one of the fol-
lowing:

• Press the cruise switch.
• Turn the ignition off.

If you press the cancel O switch
once, the set speed limit will cancel,
but it will not turn the system off. If
you wish to reset the speed limit,
move the lever up (to RES+) or down
(to SET-) to the desired speed.

OCK057032L

CAUTION

The “---” indicator will blink if
there is a problem with Manual
Speed Limit Assist system.
If this occurs, have the system
checked by a professional work-
shop.
Kia recommends to visit an
authorised Kia dealer/service
partner.

Summary of Contents for Stinger 2019
































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments