manualshive.com logo in svg

Kia Stinger 2019, Owner'S Manual, Page: 373 / 671

Share
Download
Kia Stinger 2019 Owner'S Manual Download Page 373

Driving your vehicle

90

5

2. Move the lever down (to SET-).
3. Move the lever up (to RES+) or

down (to SET-), and release it at
the desired speed. Move the lever
up (to RES+) or down (to SET-)
and hold it. The speed will increase
or decrease by 10 km/h (5 mph).

Move the lever up (to RES+) or
down (SET-) and release it imme-
diately. The speed will increase or
decrease by 1 km/h.

The set speed limit will display on

the instrument cluster.

The set speed limit will be displayed.
To drive over the preset speed limit
you must depress hard on the accel-
erator pedal (more than approxi-
mately 80%) until the kick down
mechanism works with a clicking
noise. Then the set speed limit will
blink and chime will sound until you
return the vehicle speed within the
speed limit.

OCK057173

OCK057033L

OCK057034L

Summary of Contents for Stinger 2019
































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments