manualshive.com logo in svg

Kia Stinger 2019, Owner'S Manual, Page: 370 / 671

Share
Download
Kia Stinger 2019 Owner'S Manual Download Page 370

5 87

Driving your vehicle

To temporarily accelerate with
the cruise control on:

If you want to speed up temporarily
when the cruise control is on,
depress the accelerator pedal.
Increased speed will not interfere
with cruise control operation or
change the set speed.
To return to the set speed, take your
foot off the accelerator pedal.

To cancel cruise control, do
one of the following:

• Depress the brake pedal.

• Shift into N (Neutral) if equipped

with an Automatic Transaxle.

• Press the CANCEL/O button locat-

ed on the steering wheel.

• Decrease the vehicle speed lower

than the memory speed by approx-
imately 20 km/h (12 mph).

• Decrease the vehicle speed to less

than approximately 25 km/h (15
mph).

Each of these actions will cancel
cruise control operation (the cruise
set indicator light will go off), but it
will not turn the system off. If you
wish to resume cruise control opera-
tion, move up the lever (to RES+)
located on your steering wheel. You
will return to your previously preset
speed.

OCK057031L

OCK057171L

■

Type A

■

Type B

Summary of Contents for Stinger 2019
































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments