manualshive.com logo in svg

Kia Stinger 2019, Owner'S Manual, Page: 360 / 671

Share
Download
Kia Stinger 2019 Owner'S Manual Download Page 360

5 77

Driving your vehicle

(Continued)
• Use only the genuine Kia sensor

cover. Do not arbitrarily apply
paint on the sensor cover.  

• Do not tint the window or install

stickers, accessories around the
inside mirror where the camera is
installed.

• Make sure the frontal camera

installation point does not get wet. 

• Do not impact or arbitrarily

remove any radar/camera compo-
nents.

• Do not place reflective

objects(white paper or mirror etc.)
on the crash pad. 
The system may activate unneces-
sarily due to reflect of the sunlight. 

• Excessive audio volume may dis-

turb the sound of the system warn-
ing alarm.

Warning message and warning
light

When the sensor cover or the sensor
lens is smudged with the foreign sub-
stances, such as snow or rain, the
FCA operation may temporarily stop.
In this case, the warning message
appears to warn the driver.

This is not a malfunction with the
FCA. To operate the FCA again,
remove the foreign substances.

Remove any dirt, snow, or debris and
clean the radar sensor cover before
operating the FCA system.
The FCA may not properly operate in
an area (e.g. open terrain), where
any substances are not detected
after turning ON the engine.

OCK057093L

Summary of Contents for Stinger 2019
































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments