manualshive.com logo in svg

Kia Stinger 2019, Owner'S Manual, Page: 351 / 671

Share
Download
Kia Stinger 2019 Owner'S Manual Download Page 351

Driving your vehicle

68

5

The VSM does not operate when: 

• Driving on bank road such as gra-

dient or incline 

• Driving rearward
• ESC OFF indicator light (

)

remains on the instrument cluster

• EPS (Electronic Power Steering)

indicator light remains on the
instrument cluster

VSM operation off

If you press the ESC OFF button to
turn off the ESC, the VSM will also
cancel and the ESC OFF indicator
light (

) illuminates.

To turn on the VSM, press the button
again. The ESC OFF indicator light
goes out.

Malfunction indicator

The VSM can be deactivated even if
you don’t cancel the VSM operation
by pressing the ESC OFF button. It
indicates that a malfunction has
been detected somewhere in the
EPS (Electronic Power Steering)
system or VSM system. If the ESC
indicator light (

) or EPS warning

light remains on, have the system
checked by a professional workshop.
Kia recommends to visit an autho-
rised Kia dealer/service partner.

✽

✽

NOTICE

• The VSM is designed to function

above approximately 22 km/h 
(13 mph) on curves.

• The VSM is designed to function

above approximately 10 km/h 
(6 mph) when a vehicle is braking
on a split-mu road. The split-mu
road is made of surfaces which
have different friction forces.

WARNING 

• The Vehicle  Stability

Management system is not a
substitute for safe driving
practices but a supplemen-
tary function only. It is the
responsibility of the driver to
always check the speed and
the distance to the vehicle
ahead. Always hold the steer-
ing wheel firmly whilst driv-
ing.

• Your vehicle is designed to

activate according to the dri-
ver’s intention, even with the
VSM installed. Always follow
all the normal precautions for
driving at safe speeds for the
conditions – including driving
in inclement weather and on a
slippery road.

• Driving with varying tyre or

wheel sizes may cause the
VSM system to malfunction.
When replacing tyres, make
sure they are the same size as
your original tyres.

Summary of Contents for Stinger 2019
































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments