manualshive.com logo in svg

Kia Stinger 2019, Owner'S Manual, Page: 350 / 671

Share
Download
Kia Stinger 2019 Owner'S Manual Download Page 350

5 67

Driving your vehicle

ESC OFF usage

When driving

• ESC should be turned on for daily

driving whenever possible.

• To turn ESC off whilst driving,

press the ESC OFF button whilst
driving on a flat road surface.

✽

✽

NOTICE

• When operating the vehicle on a

dynamometer, ensure that the ESC
is turned off by pressing the ESC
OFF button for more than 3 sec-
onds (ESC OFF light illuminated).
If the ESC is left on, it may prevent
the vehicle speed from increasing,
and result in false diagnosis.

• Turning the ESC off does not

affect ABS or brake system opera-
tion.  

Vehicle stability management
(VSM)

This system provides further
enhancements to vehicle stability
and steering responses when a vehi-
cle is driving on a slippery road or a
vehicle detected changes in coeffi-
cient of friction between right wheels
and left wheels when braking.

VSM operation

When the VSM is operating:
• ESC (Electronic Stability Control)

(

) light will blink.

• The steering wheel may be con-

trolled.

When the vehicle stability manage-
ment is operating properly, you can
feel a slight pulsation in the vehicle.
This is only the effect of brake control
and indicates nothing unusual.

WARNING

Never press the ESC OFF but-
ton whilst ESC is operating
(ESC indicator light blinks).
If ESC is turned off whilst ESC
is operating, the vehicle may
slip out of control.

Summary of Contents for Stinger 2019
































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments