manualshive.com logo in svg

Kia Stinger 2019, Owner'S Manual, Page: 349 / 671

Share
Download
Kia Stinger 2019 Owner'S Manual Download Page 349

Driving your vehicle

66

5

• ESC off state 2

To cancel ESC operation, press the
ESC OFF button (ESC OFF 

) for

more than 3 seconds. ESC OFF indi-
cator light (ESC OFF 

) illuminates

and ESC OFF warning chime will
sound. At this state, the engine con-
trol function and brake control func-
tion do not operate. It means the car
stability control function does not
operate any more.

Indicator light

When ignition switch is turned to ON,
the indicator light illuminates, then
goes off if the ESC system is operat-
ing normally.
The ESC indicator light blinks when-
ever ESC is operating or illuminates
when ESC fails to operate.
ESC OFF indicator light comes on
when the ESC is turned off with the
button.

OCK057086L

■

ESC indicator light 

■ 

ESC OFF indicator light 

CAUTION

Driving with varying tyre or
wheel sizes may cause the ESC
system to malfunction. When
replacing tyres, make sure they
are the same size as your origi-
nal tyres.

WARNING  

The Electronic Stability Control
system is only a driving aid; use
precautions for safe driving by
slowing down on curved,
snowy, or icy roads. Drive slow-
ly and don’t attempt to acceler-
ate whenever the ESC indicator
light is blinking, or when the
road surface is slippery.

Summary of Contents for Stinger 2019
































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments