manualshive.com logo in svg

Kia Stinger 2019, Owner'S Manual, Page: 342 / 671

Share
Download
Kia Stinger 2019 Owner'S Manual Download Page 342

5 59

Driving your vehicle

Warning messages

Parking brake automatically
engaged

When the EPB is applied from Auto
Hold, a warning will sound and a
message will appear.

AUTO HOLD turning off!
Press brake pedal

When the conversion from Auto Hold
to EPB is not working properly a
warning will sound and a message
will appear.

WARNING

• Press the accelerator pedal

slowly when you start the
vehicle.

• For your safety, cancel the

Auto Hold when you drive
downhill or back up the vehi-
cle or park the vehicle.

CAUTION

If there is a malfunction with the
driver’s door, engine bonnet
open detection system, the Auto
Hold may not work properly.
In this case, have your vehicle
inspected by a professional
workshop. Kia recommends to
contact an authorised Kia deal-
er/service partner.

OCK057081L

OCK057079L

Summary of Contents for Stinger 2019
































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments