manualshive.com logo in svg

Kia Stinger 2019, Owner'S Manual, Page: 340 / 671

Share
Download
Kia Stinger 2019 Owner'S Manual Download Page 340

5 57

Driving your vehicle

Set up

1. With the driver's door, engine bon-

net closed, fasten the driver's seat
belt or depress the brake pedal
and then press the Auto Hold but-
ton. The white AUTO HOLD indi-
cator will come on and the system
will be in the standby position.

2. When you stop the vehicle com-

pletely by depressing the brake
pedal, the AUTO HOLD indicator
changes from white to green.

3. The vehicle will remain stationary

even if you release the brake pedal.

4. If EPB is applied, Auto Hold will be

released.

Leaving

If you press the accelerator pedal
with  the shift lever in D (Drive) or
manual mode, the Auto Hold will be
released automatically and the vehi-
cle will start to move. The indicator
changes from green to white.

OCK057019R

OCK057020R

WARNING

When driving off from Auto
Hold by depressing the acceler-
ator pedal, always check the
surrounding area near your
vehicle.
Slowly depress the accelerator
pedal for a smooth launch.

Summary of Contents for Stinger 2019
































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments