manualshive.com logo in svg

Kia Stinger 2019, Owner'S Manual, Page: 317 / 671

Share
Download
Kia Stinger 2019 Owner'S Manual Download Page 317

Driving your vehicle

34

5

Shift to P after stopping

The warning message appears on
the LCD display, when the brake
pedal is not depressed whilst shifting
the gear.
We recommend you to depress the
brake pedal and then shift the gear.

Press UNLOCK to change gear

The warning message appears on
the LCD display, when the
[UNLOCK] button is not pressed
whilst shifting the gear. We recom-
mend you to press the [UNLOCK]
button and then shift the gear.

PARK engaged

The message appears on the LCD
display, when the P (Park) position is
engaged.

OCK057073L

OCK057078L

OCK057075L

Summary of Contents for Stinger 2019
































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments