manualshive.com logo in svg

Kia Stinger 2019, Owner'S Manual, Page: 316 / 671

Share
Download
Kia Stinger 2019 Owner'S Manual Download Page 316

5 33

Driving your vehicle

Check shift lever

The warning message appears on
the LCD display, when there is a mal-
function with one of the key trans-
mission components.
In this case, have the vehicle checked
by a professional workshop immedi-
ately. Kia recommends to visit an
authorised Kia dealer/service partner.

Shifting conditions not met

The warning message appears on
the LCD display, when engine RPM
is too high, or when driving speed is
too fast to shift the gear.
We recommend you to decrease
your RPM level or slow down before
shifting the gear.

Press brake pedal to change gear

The warning message appears on
the LCD display, when the brake
pedal is not depressed whilst shifting
the gear.
We recommend you to depress the
brake pedal and then shift the gear.

OCK057070L

OCK057071L

OCK057072L

Summary of Contents for Stinger 2019
































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments