manualshive.com logo in svg

Kia Stinger 2019, Owner'S Manual, Page: 293 / 671

Share
Download
Kia Stinger 2019 Owner'S Manual Download Page 293

Driving your vehicle

10

5

Starting the engine

✽

✽

NOTICE 

- Kick down 

mechanism

Use the kick down mechanism for
maximum acceleration. Depress the
accelerator pedal beyond the pres-
sure point. The automatic transmis-
sion will shift to a lower gear
depending on the engine speed.

Starting the petrol engine 

1. Carry the smart key or leave it

inside the vehicle.

2. Make sure the parking brake is

firmly applied.

3.

Automatic transaxle

- Place the

transaxle shift lever in P (Park).
Depress the brake pedal fully.
You can also start the engine
when the shift lever is in the N
(Neutral) position.

4. Press the engine start/stop button.

It should be started without
depressing the accelerator.

5. Do not wait for the engine to warm

up whilst the vehicle remains sta-
tionary.
Start driving at moderate engine
speeds. (Steep accelerating and
decelerating should be avoided.)

WARNING

• Always wear appropriate

shoes when operating your
vehicle.

Unsuitable shoes

(high heels, ski boots,etc.)
may interfere with your ability
to use the brake, accelerator
and clutch pedal.

• Do not start the vehicle with the

accelerator pedal depressed.
The vehicle can move and lead
to an accident.

• Wait until the engine rpm is

normal. The vehicle may sud-
denly move if the brake pedal
is released when the rpm is
high.

Summary of Contents for Stinger 2019
































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments