manualshive.com logo in svg

Kia Stinger 2019, Owner'S Manual, Page: 28 / 671

Share
Download
Kia Stinger 2019 Owner'S Manual Download Page 28

3 9

Safety features of your vehicle

Seatback angle

Push the control switch forward or
backward to move the seatback to
the desired angle. Release the
switch once the seat reaches the
desired position.

Seat height

Pull the front portion of the control
switch up to raise or press down to
lower the front part of the seat cush-
ion. Pull the rear portion of the con-
trol switch up to raise or press down
to lower the seat cushion. Release
the switch once the seat reaches the
desired position.

Lumbar support

The lumbar support can be adjusted
by pressing the lumbar support
switch on the side of the seat.
1. Press the front portion (1) of the

switch to increase support, or the
rear portion (2) of the switch, to
decrease support.

OCK037006R

OCK037007R

OCK037009R

Summary of Contents for Stinger 2019
































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments