Kia Stinger 2019 Owner'S Manual Download Page 277

Page: 277 / 671

172

Features of your vehicle

Coat hook (if equipped)

❈

This actual feature may differ from the illus-
tration.

To use the coat hook, pull down the
upper portion of coat hook.

CAUTION

Do not hang heavy clothes, since
those may damage the hook.

WARNING

Do not hang other objects such
as hangers or hard objects
except clothes. Also, do not put
heavy,

sharp or breakable

objects in the clothe pockets. In
an accident or when the curtain
air bag is inflated, it may cause
vehicle damage or personal
injury.

OJF046403

OCK047441

OCK047442

■

Type A

■

Type B

Summary of Contents for Stinger 2019
































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for Stinger 2019

Reviews:

Kia Stinger 2019, Owner'S Manual, Page: 277 / 671

Search results

Summary of Contents for Stinger 2019

Reviews: