manualshive.com logo in svg

Kia Stinger 2019, Owner'S Manual, Page: 265 / 671

Share
Download
Kia Stinger 2019 Owner'S Manual Download Page 265

160

4

Features of your vehicle

These compartments can be used to
store small items.

Centre console storage

To open the centre console storage,
pull up the lever.

Glove box

The glove box can be locked and
unlocked with a master key (1). (if
equipped)
To open the glove box, pull the lever
(2) and the glove box will automati-
cally open. Close the glove box after
use.

STORAGE COMPARTMENT

WARNING - 

Flammable
materials

Do not store cigarette lighters,
propane cylinders, or other
flammable/explosive materials
in the vehicle. These items may
catch fire and/or explode if the
vehicle is exposed to hot tem-
peratures for extended periods.

CAUTION

• To avoid possible theft, do not

leave valuables in the storage
compartment.

• Always keep the storage com-

partment covers closed whilst
driving. Do not attempt to
place so many items in the
storage compartment that the
storage compartment cover
cannot close securely.

OCK047429R

OCK047430R

Summary of Contents for Stinger 2019
































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments