manualshive.com logo in svg

Kia Stinger 2019, Owner'S Manual, Page: 256 / 671

Share
Download
Kia Stinger 2019 Owner'S Manual Download Page 256

4 151

Features of your vehicle

Temperature control

• Front seat
The temperature will increase to the
maximum (HI) by turning the knob to
the extreme right.

The temperature will decrease to the
minimum (Lo) by turning the knob to
the extreme left.
When turning the knob, the tempera-
ture will increase or decrease by
0.5°C/1°F. When set to the lowest
temperature setting, the air condi-
tioning will operate continuously.

• Rear seat
Turn the rear seat temperature con-
trol knob to adjust temperature.
The front and rear seat side temper-
ature is adjusted individually.

Adjusting the driver and passenger
side temperature equally

• Press the “SYNC” button to adjust

the driver and passenger side tem-
perature equally.
The passenger side temperature
will be set to the same temperature
as the driver side temperature.

• Turn the driver side temperature

control knob. The driver and pas-
senger side temperature will be
adjusted equally.

OCK047312

■

Driver’s side

■

Passenger’s side

OCK047311

OCK047323

■

Rear seat

Summary of Contents for Stinger 2019
































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments