manualshive.com logo in svg

Kia Stinger 2019, Owner'S Manual, Page: 255 / 671

Share
Download
Kia Stinger 2019 Owner'S Manual Download Page 255

150

4

Features of your vehicle

✽

✽

NOTICE - 

2nd row outlet
vents (E,F)

• The air flow of the 2nd row outlet

vents is controlled by the front cli-
mate control system and delivered
through the inside air duct of the
floor (E, F).

• The air flow of the 2nd row outlet

vents (E, F) may be weaker than
the instrument panel vents for the
long air duct.

Defrost-Level 

Most of the air flow is directed to the
windscreen with a small amount of air
directed to the side window defrosters.

Instrument panel vents

The outlet vents can be opened or
closed separately using the thumb-
wheel.
Also, you can adjust the direction of
air delivery from these vents using
the vent control lever as shown.

OCK048321R

OCK047310

Summary of Contents for Stinger 2019
































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments