manualshive.com logo in svg

Kia Stinger 2019, Owner'S Manual, Page: 250 / 671

Share
Download
Kia Stinger 2019 Owner'S Manual Download Page 250

4 145

Features of your vehicle

Checking the amount of air
conditioner refrigerant and
compressor lubricant

When the amount of refrigerant is
low, the performance of the air condi-
tioning is reduced. Overfilling also
has a bad influence on the air condi-
tioning system.
Therefore, if abnormal operation is
found, have the system inspected by
a professional workshop.
Kia recommends to visit an autho-
rised Kia dealer/service partner.

WARNING - 

Vehicles

equipped with R-1234yf

Because the refriger-
ant is mildly inflam-
mable and at very
high pressure, the air

conditioning system
should only be serv-
iced by trained and
certified technicians.

It is important that the correct
type and amount of oil and
refrigerant is used.
Otherwise, it may cause damage
to the vehicle and personal injury.

WARNING - 

Vehicles

equipped with R-134a

Because the refriger-
ant is at very high
pressure, the air con-
ditioning system
should only be serv-

iced by trained and certified
technicians. It is important that
the correct type and amount of
oil and refrigerant is used.
Otherwise, it may cause damage
to the vehicle and personal injury.

Summary of Contents for Stinger 2019
































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments