manualshive.com logo in svg

Kia Stinger 2019, Owner'S Manual, Page: 242 / 671

Share
Download
Kia Stinger 2019 Owner'S Manual Download Page 242

4 137

Features of your vehicle

Tailgate room lamp 
(if equipped)

The tailgate room lamp comes on
when the tailgate is opened.

Glove box lamp

The glove box lamp comes on when
the glove box is opened.

Vanity mirror lamp (if equipped)

Opening the lid of the vanity mirror
will automatically turn on the mirror
light.

OCK047424R

CAUTION

To prevent unnecessary charg-
ing system drain, close the
glove box securely after using
the glove box.

CAUTION

The tailgate room lamp comes
on as long as the tailgate lid
opens. To prevent unnecessary
charging system drain, close
the tailgate lid securely after
using the tailgate room.

OCK047422

OCK047425R

CAUTION - 

Vanity mirror
lamp

Always have the switch in the
off position when the vanity mir-
ror lamp is not in use. If the sun-
visor is closed without the lamp
off, it may discharge the battery
or damage the sunvisor.

Summary of Contents for Stinger 2019
































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments