manualshive.com logo in svg

Kia Stinger 2019, Owner'S Manual, Page: 239 / 671

Share
Download
Kia Stinger 2019 Owner'S Manual Download Page 239

134

4

Features of your vehicle

CAUTION

• To prevent possible damage

to the wipers or windscreen,
do not operate the wipers
when the windscreen is dry.

• To prevent damage to the wiper

blades, do not use petrol,
kerosene, paint thinner, or
other solvents on or near them.

•

To prevent damage to the
wiper arms and other compo-
nents, do not attempt to move
the wipers manually.

• To prevent possible damage

to the wipers and washer sys-
tem, use anti-freezing washer
fluids in the winter season or
cold weather.

Summary of Contents for Stinger 2019
































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments