manualshive.com logo in svg

Kia Stinger 2019, Owner'S Manual, Page: 234 / 671

Share
Download
Kia Stinger 2019 Owner'S Manual Download Page 234

4 129

Features of your vehicle

Dynamic Bending Light (DBL)
(if equipped)

Dynamic Bending Light (DBL) uses
the steering angle and vehicle speed,
to keep your field of vision wide by
swiveling and levelling the headlamp.

Change the switch to the AUTO posi-
tion when the engine is running. The
dynamic bending light (DBL) will
operate when the headlamp is ON.
To turn off the DBL, change the
switch to other positions. After turn-
ing the DBL off, headlamp swiveling
no longer occurs, but levelling oper-
ates continuously.
If the DBL malfunction indicator
comes on, the DBL is not working
properly. Drive to the nearest safe
location and restart the engine. If the
indicator continuously remains on,
have the system checked by a pro-
fessional workshop. Kia recom-
mends to visit an authorised Kia
dealer/service partner.

OCK047412

OYB047412R

■

Type A

■

Type B

Summary of Contents for Stinger 2019
































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments